Merrychef conneX service and repair in Wellington
CES Wellington are Merrychef service agents. We service and repair the Merrychef conneX range, including the conneX 12 and conneX 16, across Greater Wellington, the Kāpiti Coast, the Wairarapa and the Manawatū.
CES Wellington are service agents for Merrychef high-speed ovens. We have just had two technicians complete a Merrychef training course conducted by Merrychef's head of worldwide training from the UK factory. It covered the conneX 12 and conneX 16.
Our technicians are factory-trained where applicable. Tell us the model and serial number from the nameplate on the rear of the oven, and whether the display is showing a warning or an error code.
We also repair the wider Merrychef and TurboChef range, including earlier eikon models. See our Merrychef and TurboChef commercial oven repairs page. For other ovens, see commercial oven repair and commercial oven servicing.
The Merrychef conneX 12 and conneX 16
The conneX is Merrychef's current high-speed microwave combination oven. It cooks with microwave, convection and tuned impingement together, and is used in cafés, bars, quick-service kitchens and other sites that need hot food quickly from a compact bench oven.
The official user book also covers the conneX 12e, a more compact model in the same range.
From the Merrychef Installation and User Manual and the published specification sheets:
- conneX 12. A 12-inch (305 mm) square cavity in an oven about 356 mm wide, 641 mm deep and 619 mm high. It is designed to sit on a 600 mm worktop. Standard-power units weigh about 50 kg; high-power units about 59 kg.
- conneX 16. A 16-inch (405 mm) square cavity in an oven about 459 mm wide, 683 mm deep and 619 mm high. It is designed to sit on a 700 mm worktop and weighs about 67 kg.
- A 7-inch HD easyTouch 2.0 touchscreen, used much like a phone, with cooking profiles that can include written or picture prompts for staff.
- Wi-Fi and ethernet as standard, so menus and software can be updated through KitchenConnect, or with a USB stick.
- A built-in catalytic converter for ventless operation, and a cool-to-touch exterior. Merrychef specifies no side clearance, and 50 mm of space above the oven. It is not intended to be built in.
- A stainless steel cavity with rounded edges, a front-mounted air filter that should be kept clean and fitted, and a choice of stainless steel or carbon black casework.
- Self-diagnostics, which can help us trace a fault when you call.
Power supply options vary by model and market. The nameplate on the rear of the oven shows the model, serial number and electrical rating. A photo of that plate helps us arrive with the right information.
Daily cleaning and care
The user book asks for a daily clean of the cavity, the front air filter, the outside of the oven, and any cook plates or accessories. In outline:
- Let the cavity cool below 50°C, or use the oven's Cool Down function, before you clean. The user book warns against spraying water into a hot cavity.
- Use Merrychef oven cleaner and protector on the cavity and door, then wash the cleaner off thoroughly with clean warm water so none is left behind for the next cook. A mild household detergent is fine for the air filter and accessories, and a household stainless steel or hard-surface cleaner for the outside.
- Clean the air filter by hand, rinse it, and dry it before refitting. Do not run the oven without the filter fitted, and keep the air outlets on the rear clear.
- Do not use sharp tools, harsh abrasives or caustic cleaners. Caustic products can permanently damage the catalytic converters. Do not spray the inside or outside of the oven with a hose or pressure washer, and keep the USB cover closed while you clean.
Follow the on-screen cleaning prompts and the user book that came with the oven. If the door seals look worn, or the oven is not cooking as it should after a clean, call us. Leave the panels on.
Common faults and messages
The user book includes a short fault-finding chart for operators. These are the problems it lists, and what to try before you call:
- The oven does not work and the display is blank. Check whether there is a power cut, whether the isolator is on, and whether the oven is plugged in correctly.
- Some screen controls do not work. This can be a permissions setting. Ask an authorised user to check it.
- A warning message is on the display. Follow the instructions shown on the screen.
- Food is not cooking correctly. The oven may need a clean, the wrong or a modified cooking profile may be selected, the food may have been wrapped or taken out early, or it may not have been at the expected starting temperature.
- The oven does not finish cooking. Close the door, check the air filter is present and fitted correctly, allow the oven to cool, and make sure nothing is blocking the air vents.
- The display shows an error code. Note the code, or photograph the display, and contact your service agent. That is us.
If you smell burning or the oven is tripping the power, switch it off at the wall or isolator if it is safe to do so, and call us. Leave the panels on. There are live parts inside.
When to call us
Call us if the oven shows an error code, will not power up after those checks, will not finish a cook, or is still cooking poorly after a clean and the right profile. Also call if the door seals are worn or damaged, or if you would rather a technician handle the job. We can also put the oven on a planned maintenance visit.
Planned maintenance
A planned visit catches tired parts before a service. Every 4 months or six-monthly is ideal. If the kitchen trades 7 days or runs early to late, quarterly visits may suit better. High-speed ovens can sit on the same schedule as the rest of the kitchen. See planned maintenance or request a maintenance quote.
You get an electronic service report for every oven, with electrical certification as required. Our work is covered by a 90-day parts and labour warranty. If we find extra work, we quote it first. Nothing extra goes ahead without your OK.
Where we cover
Greater Wellington, the Kāpiti Coast (including Waikanae), the Wairarapa and the Manawatū. Wairarapa jobs are covered by our technicians based in the Wairarapa, with same-day response. Our target for emergency responses is two hours. Our workshop is at Unit 39, 83 Eastern Hutt Road, Taita, Lower Hutt 6109. See our areas page for more.
Office hours are Monday to Friday, 7:30am to 5:00pm, with 7-day cover and after-hours emergency cover. Same-day response. After-hours charges may apply.
FAQ
Are you Merrychef service agents?
Yes. CES Wellington are service agents for Merrychef high-speed ovens, including the conneX range.
Which Merrychef conneX models do you work on?
The conneX 12 and conneX 16, and the conneX 12e which is also covered in the official user book. We also service and repair the wider Merrychef and TurboChef range. See Merrychef and TurboChef commercial oven repairs.
How should we clean a Merrychef conneX?
Clean the cavity, front air filter, exterior and accessories daily, once the oven has cooled. Use Merrychef cleaner and protector in the cavity, wash them off thoroughly, and never use caustic cleaners, sharp tools or a hose. Follow the user book and the prompts on the screen. If something does not look right, call us.
The display is showing a warning or an error code. What should we do?
For a warning, follow the instructions on the screen. For an error code, write it down or photograph the display before you switch the oven off, leave the panels on, and call us on 0800 90 60 30.
How often should a Merrychef conneX be serviced?
Every 4 months or six-monthly is ideal. Kitchens trading 7 days or running early to late may suit quarterly visits.
How fast can you get to a Merrychef breakdown?
Our target for emergency responses is two hours.
Where do you cover Merrychef conneX repairs?
Greater Wellington, the Kāpiti Coast (including Waikanae), the Wairarapa and the Manawatū. Wairarapa jobs are covered by our technicians based in the Wairarapa, with same-day response.
Book Merrychef conneX service or repair
Call 0800 90 60 30 or email service@cesw.co.nz.
Book a job online, or request a maintenance quote.