Unox oven error codes
What ChefTop and BakerTop alarm and warning codes mean, safe checks to try first, and when to call a technician.
Error on the display and service starting soon? Call 0800 90 60 30. Calls are answered 24 hours, 7 days. Technician cover runs 7 days, with after-hours emergency cover. Our target for emergency responses is two hours. It's a target, not a guarantee, and it depends on workload at the time.
Unox ChefTop and BakerTop ovens show two kinds of message. A warning (WF) lets the oven keep running with limits. An alarm (AF) stops the oven. Newer MIND.Maps ovens use a longer list, and some codes may differ. Before you switch off, photograph the display and note the model from the rating plate. CES Wellington provides Unox oven service and repair. See all brand pages on error codes.
Unox ChefTop and BakerTop oven alarms (AF)
An AF alarm stops every cooking cycle and blocks the screen settings.
| Code | What it means | What you can safely do |
|---|---|---|
| AF01 | Motor thermal alarm: the fan motor's thermal protection has tripped. | Switch the oven off and call us. Leave the panels on. |
| AF02 | Safety thermostat alarm. | Switch the oven off and call us. Leave the panels on. |
| AF03 | Oven cavity (temperature probe) alarm. | Call us. Leave the panels on. |
| AF04 | Communications failure alarm. | Call us. Leave the panels on. |
| AF05 | Communications failure with the gas board (gas ovens). | Call us. Leave the panels on. |
| AF06 | Fume temperature alarm (gas ovens). | Switch the oven off and call us. Leave the panels on. |
| AF08 | Motor tachometer alarm: the fan speed isn't being read correctly. | Call us. Leave the panels on. |
| AF09 | No water, or very little water, during a wash. | Check the water tap to the oven is fully open and the hose isn't kinked. Once the water is back on, Unox says to switch the oven off and on again and start a wash cycle straight away. If it comes back, call us. |
| AF11 | No 230 V power supply to the gas board (gas ovens). | Call us. Leave the panels on. |
| AF12 | No 230 V power supply to the chicken cabinet. | Call us. Leave the panels on. |
| AF13 | Cavity temperature is too high (over 340°C). | Switch the oven off at the wall or isolator if it's safe to do so. Call us. |
Unox ChefTop and BakerTop oven warnings (WF)
The oven keeps running, but with limits.
| Code | What it means | What you can safely do |
|---|---|---|
| WF01 / WF02 | Cavity probe 1 or 2 fault. The oven runs on the other probe, so temperature control may be less accurate. | You can keep cooking with care. Call us to book a repair. |
| WF03 | Core probe fault. The core probe can't be used for cooking cycles. | Cook without the core probe. Call us. |
| WF04 | Motor tachometer warning. An AF08 alarm may follow. | Call us before it stops the oven. |
| WF05 | Cooling fan fault. The oven runs, but its internal parts aren't being cooled properly. | Call us soon. Don't run the oven longer than you need to. |
Press the P button to clear the warning list from the screen. If there are several messages, press P again to scroll through them.
UNOX.Pure-RO water treatment
If your Unox has the UNOX.Pure-RO reverse osmosis unit, it has its own codes.
| Code | What it means | What you can safely do |
|---|---|---|
| AO01 | Pressure gauge alarm: pressure too high. The reverse osmosis unit stops all water treatment cycles. | Call us. |
| AO02 | Low pressure alarm. Water treatment stops. | Call us. |
| AO03 | Communications failure alarm. | Call us. |
| WO01 | Osmosis filter needs replacing. The unit keeps running. | Call us to arrange a filter change. |
| WO02 | Intake filters blocked. | Call us. |
Accessories have their own codes too: AL (prover), AC and WC (hood), AS (static oven) and AD (display board). For those, photograph the code and call us.
Source: UNOX S.p.A., ChefTop / BakerTop installation, use and maintenance manual (English), oven-user interface alarm and warning tables, pages 67–71.
Safe checks to try first
- Water: the water tap to the oven is fully open, and the hose isn't kinked.
- Door: closed fully.
- Power: the oven is on at the wall or isolator, and the site breaker hasn't tripped.
- Vents: nothing is blocking the oven's air vents or the cooling fan.
Leave the panels on. There are live electrical parts inside. If you smell burning, or smell gas on a gas oven, switch off if it's safe to do so and call us. If you smell gas, get everyone out first. See before you call.
When to call a technician
- The safe checks above don't clear the code.
- Any AF alarm except AF09 after the water is back on.
- A WF warning that keeps coming back.
- The oven won't heat, trips the power or smells of burning.
FAQ
What do A01 and A02 mean on a Unox?
Unox codes have two letters before the number. AO01 and AO02 are UNOX.Pure-RO reverse osmosis alarms. AO01 means the pressure is too high, and AO02 means it's too low. Both stop water treatment. AF01 and AF02 are oven alarms: AF01 is the fan motor's thermal alarm, and AF02 is the safety thermostat alarm. Check which letters are on your display, then call 0800 90 60 30.
What does AF09 mean on a Unox oven?
AF09 means there was no water, or very little, during a wash. Check the water tap is fully open. Once water is back on, Unox says to switch the oven off and on again and start a wash cycle straight away. If it comes back, call us.
What does AF01 mean on a Unox?
AF01 is a motor thermal alarm. The fan motor's thermal protection has tripped and the oven stops. Switch it off and call us.
Are MIND.Maps codes the same?
Newer Unox CHEFTOP and BAKERTOP MIND.Maps ovens use AF and WF codes too, but the list is longer and some codes may differ. Photograph the code and call us.
Do you repair Unox ovens?
Yes. CES Wellington provides service and repair for Unox combi and convection ovens. Our factory-trained technicians (where applicable) work on commercial ovens every day. See Unox oven repairs and combi oven repairs. We don't do gas work in Palmerston North, Pahiatua, Masterton, Carterton or the Wairarapa. In those areas we repair and service electric combi ovens and dishwashers.
Error still showing?
Call 0800 90 60 30, email service@cesw.co.nz or book a job. The line is answered 24 hours, 7 days. Our work is covered by a 90-day parts and labour warranty.