Case studies

Karori pizza shop oven swap over by CES Wellington

CES Wellington removed a Lincoln conveyor oven and two old Blodgett conveyor ovens, and installed two new XLT X3H-3240 natural gas conveyor ovens as a double stack on a frame at a Karori pizza shop.

Completed 9 to 11 November 2026

Book a job 0800 90 60 30

Two new XLT X3H-3240 natural gas conveyor ovens installed as a double stack on a frame at a Karori pizza shop by CES Wellington
The new XLT natural gas conveyor ovens, stacked on a frame and connected.

The job

A Karori pizza shop needed its old conveyor ovens replaced. We removed a Lincoln conveyor oven and two old Blodgett conveyor ovens. One of the Blodgett ovens was placed at the front of the shop, because the customer had already sold it.

The two new XLT X3H-3240 natural gas conveyor ovens were supplied by JLLennard, who also arranged removal and disposal of the old ovens that were leaving the site. We installed them as a double stack on a frame. Work took place from 9 to 11 November 2026.

What we did

The swap covered strip-out and moving of the old ovens, positioning the two new XLT units on the frame, and connecting the gas and electrical supplies. A gas soundness test passed, burner pressure was checked on high and low, and the ovens were commissioned. We showed the owner how to adjust the time and temperature, and how to remove the door, nozzles, belt and frame for cleaning, then ran test pizzas.

Every oven install includes an electronic service report. Our work is covered by a 90-day parts and labour warranty. We offer 7-day cover with after-hours emergency cover, same-day response across Greater Wellington (extra or out-of-hours charges may apply). We aim to respond to emergencies within 2 hours, depending on workload. This is a target, not a guarantee.

Burner pressure test graph for the bottom XLT oven at a Karori pizza shop, showing high and low readings
Burner pressure checked on high and low — bottom oven.

For pizza and conveyor oven repairs and installs more widely, see our pizza and conveyor oven page. Related reading: commercial oven repair and commercial oven servicing.

The result

The new double stack was installed, tested and commissioned, and the store was shown how to set and clean the ovens.

Gas rating plate on a new XLT X3H-3240 conveyor oven showing AS 4563 conformance. The serial number has been removed.
The new ovens are natural gas, and gas-rated to AS 4563.

Need an oven replaced in Karori or Wellington City?

Kitchens in Karori, Wellington City and across Greater Wellington that need a commercial oven replaced or installed can call 0800 90 60 30 or book a job. See more from kitchens we work in in our gallery, or ask about planned maintenance so the next service is already on the calendar.

CES Wellington brings 46+ years’ combined experience, led by Mark Edwards (36 years) and Nathan Bean (10+).

FAQ

Do you install and replace commercial pizza ovens in Karori and Wellington City?

Yes. We install and replace commercial pizza and conveyor ovens across Greater Wellington, including Karori and Wellington City. Call 0800 90 60 30.

Which pizza and conveyor oven brands do you work on?

We service and repair conveyor ovens of all brands, gas or electric, including Middleby Marshall, XLT, Blodgett, Lincoln and DMP. Middleby is a CES Wellington service-agent brand. See pizza and conveyor ovens.

What do I get after an oven install or swap?

An electronic service report for the ovens, with gas or electrical certification as required. Our work is covered by a 90-day parts and labour warranty.

Ready for an oven swap or install?

Call 0800 90 60 30 or book a job.

Electronic service report on every job. 7-day cover with after-hours emergency cover.